 |
loading
| Availability: | |
|---|---|
| Quantity: | |
HR-02A
Horus
What must be checked before starting the machine?
Clean the raw materials and remove hard objects such as iron blocks and stones19;
Check whether the rotor cotter pin is intact and manually drag the belt to test flexibility19;
Idle for 2~3 minutes to confirm that there is no abnormality before feeding;
The motor cannot start or rotates slowly?
Check the power supply voltage (low voltage should avoid peak power consumption);
Confirm whether the cover plate induction switch is triggered (common in electric motor models);
When the capacitor fails, replace it with a new one of the same specification (short circuit or capacity reduction);
Bearing overheating or motor powerlessness?
Avoid overload operation (single time ≤ 2/3 of the tank);
Check the grease (excessive, insufficient or inferior grease needs to be adjusted);
| MODEL | Capacity(g) | Voltage(V) | Power(W) | Rotation Speed (r/m) | color box Size |
| HR-02A | 100 | 110-240 | 650 | 28000 | 170x170x350 |
| HR-04A | 200 | 110-240 | 1200 | 28000 | 196x196x394 |
| HR-06B | 300 | 110-240 | 1500 | 28000 | 225x225x405 |
| HR-08A | 400 | 110-240 | 1800 | 25000 | 196x196x394 |
| HR-08B | 400 | 110-240 | 1800 | 25000 | 225x225x405 |
| HR-10B | 500 | 110-240 | 2000 | 25000 | 225x225x405 |
| HR-16B | 800 | 110-240 | 2400 | 25000 | 225x225x405 |
| HR-20B | 1000 | 110-240 | 3000 | 25000 | 245x245x410 |
| HR-30B | 1500 | 110-240 | 3500 | 25000 | 245x245x410 |
| HR-40B | 2000 | 110-240 | 4000 | 25000 | 340x330x495 |
| HR-50B | 2500 | 110-240 | 4500 | 25000 | 340x330x495 |
Grain grinder is a commercial grinder with many types of ingredients, which can be used to grind various grains, coffee beans, peppers, nuts, herbs and other ingredients, which can meet the needs of different customers. Because it can be used to grind a variety of ingredients and has a wide range of uses, it is also very profitable.
In addition, the grain grinder is also very efficient, which can quickly grind food and improve work efficiency. And it has a reasonable structural design and is made of high-quality materials, so it is durable and has a long service life. Therefore, a grain grinder is a very practical piece of equipment in the commercial field.
A Cooper coil is a mechanical element whose main function is to convert electrical and thermal energy. In addition, another important feature of the Cooper coil is high temperature resistance, which can withstand temperatures as high as 200 degrees.
In grain grinders, Cooper coils are usually used to control the work of the motor to ensure the normal operation of the equipment. Since the grain grinder needs to generate a lot of heat during the working process, it is necessary to use a high temperature resistant Cooper coil to ensure the safe operation of the equipment.
Materials ready for grinding must be dry. Dry the materials as much as possible before grinding.
Recommend grinding capacity one time: Cover the long blade in the middle and no more than 2/3 of the tank. Do not fill the grinding tank to full otherwise it will cause overload.
Recommend use time: no more than 3 minutes. General grains only need 30s to be ground into powder.
Don't clean the grinding tank with the water directly. Keep water away the grinding tank and use dried rag or brush to clean the machine.
Due to the brush motor, so some sparks and brush frictional odor is normal when the first several uses, which will disappear after you use the machine some times later.
What must be checked before starting the machine?
Clean the raw materials and remove hard objects such as iron blocks and stones19;
Check whether the rotor cotter pin is intact and manually drag the belt to test flexibility19;
Idle for 2~3 minutes to confirm that there is no abnormality before feeding;
The motor cannot start or rotates slowly?
Check the power supply voltage (low voltage should avoid peak power consumption);
Confirm whether the cover plate induction switch is triggered (common in electric motor models);
When the capacitor fails, replace it with a new one of the same specification (short circuit or capacity reduction);
Bearing overheating or motor powerlessness?
Avoid overload operation (single time ≤ 2/3 of the tank);
Check the grease (excessive, insufficient or inferior grease needs to be adjusted);
| MODEL | Capacity(g) | Voltage(V) | Power(W) | Rotation Speed (r/m) | color box Size |
| HR-02A | 100 | 110-240 | 650 | 28000 | 170x170x350 |
| HR-04A | 200 | 110-240 | 1200 | 28000 | 196x196x394 |
| HR-06B | 300 | 110-240 | 1500 | 28000 | 225x225x405 |
| HR-08A | 400 | 110-240 | 1800 | 25000 | 196x196x394 |
| HR-08B | 400 | 110-240 | 1800 | 25000 | 225x225x405 |
| HR-10B | 500 | 110-240 | 2000 | 25000 | 225x225x405 |
| HR-16B | 800 | 110-240 | 2400 | 25000 | 225x225x405 |
| HR-20B | 1000 | 110-240 | 3000 | 25000 | 245x245x410 |
| HR-30B | 1500 | 110-240 | 3500 | 25000 | 245x245x410 |
| HR-40B | 2000 | 110-240 | 4000 | 25000 | 340x330x495 |
| HR-50B | 2500 | 110-240 | 4500 | 25000 | 340x330x495 |
Grain grinder is a commercial grinder with many types of ingredients, which can be used to grind various grains, coffee beans, peppers, nuts, herbs and other ingredients, which can meet the needs of different customers. Because it can be used to grind a variety of ingredients and has a wide range of uses, it is also very profitable.
In addition, the grain grinder is also very efficient, which can quickly grind food and improve work efficiency. And it has a reasonable structural design and is made of high-quality materials, so it is durable and has a long service life. Therefore, a grain grinder is a very practical piece of equipment in the commercial field.
A Cooper coil is a mechanical element whose main function is to convert electrical and thermal energy. In addition, another important feature of the Cooper coil is high temperature resistance, which can withstand temperatures as high as 200 degrees.
In grain grinders, Cooper coils are usually used to control the work of the motor to ensure the normal operation of the equipment. Since the grain grinder needs to generate a lot of heat during the working process, it is necessary to use a high temperature resistant Cooper coil to ensure the safe operation of the equipment.
Materials ready for grinding must be dry. Dry the materials as much as possible before grinding.
Recommend grinding capacity one time: Cover the long blade in the middle and no more than 2/3 of the tank. Do not fill the grinding tank to full otherwise it will cause overload.
Recommend use time: no more than 3 minutes. General grains only need 30s to be ground into powder.
Don't clean the grinding tank with the water directly. Keep water away the grinding tank and use dried rag or brush to clean the machine.
Due to the brush motor, so some sparks and brush frictional odor is normal when the first several uses, which will disappear after you use the machine some times later.
